<th id="qxjqf"><option id="qxjqf"></option></th>
  • <del id="qxjqf"><small id="qxjqf"></small></del>

    1. <code id="qxjqf"><small id="qxjqf"></small></code>

      行业新闻

      2810&4311软件操作说明书英文版

      2016/12/08

      PowerCut laser control software

      - Operation instruction -

       

       

       

       

       

       

       

       

       

       

       

       

      Shen zhen zhi Yuan CNC Co. Ltd.

       

       

      Content

      Upper software operation instruction

      Chapter 1 Summary 3

      1.1CNC system software profile 3

      1.1.1 composition of the control system 3

      1.1.2 software installation 4

      1.1.3 Software features 7

      Chapter 2  Menu bar 9

      2.1 File menu items 9

      2.2 Edit menu item 10

      2.3 Set the menu items 11

      2.5 Display” menu items 12

      2.6 “Help” menu items 13

      Chapter 3 standard tool bar 15

      3.1 New 15

      3.2 Open 15

      3.4 Lead in 15

      3.5 Lead out 16

      3.6 Cut 16

      3.7 Copy 16

      3.8 Paste 16

      39 Withdraw 16

      3.10 Recover 17

      3.11 Translation 17

      3.12 Show all 17

      3.13 Display the page 17

      3.15 Parameters setting 17

      3.16 Array processing(virtual array) 25

      3.17 Path prewiew. 26

      Chapter 4 Grapgics creation/ Revise the tool bar 27

      .1 Create the tool bar 27

      .2 Revise the tool bar 29

      Chapter 5 Coverage/Alignment tool bar 34

      .1 Coverage tool bar 34

      .2 Alignment tool bar 34

      Chapter 6  Working panel 36

      6.1 Optional equipment: 36

      6.2 Layer management 37

      Bottom software/hardware operation instruction and line connection 42

      Chapter 1 Summary 42

      1.1System function 42

      1.3Software function 42

      Chapter 2 Operation instruction 42

      2.1 Operation panel and press buttons’ function introduction 43

      2.2 System main menu introduction 45

      After the completion of the initialization, enter into the standby interface.(as picture 2.3) 45

      2.24 U disk file interface 49

      2.25 Set the interface 50

      2.26 The methods of modifying the parameters 52

      Chapter 3 The instruction of the installation and wiring 53

      3.1 Installation size 53

      3.2 Wiring instruction 54

      3.21 Interface board 54

      3.22 Wiring diagram 55

      3.3 Port definition instruction 58

      3.3.1 Power supply signal ( This system adopt the direct current 12V-24V to supply the power.) 58

      3.3.2 U disk interface port 58

      3.3.3 PC interface port 58

      3.3.4 Network port 59

      3.3.5 port definition 59

      Chapter 4 Common problems instruction 62

      4.1 the computer connecting problems 62

      4.2 U disk reading and writing problems 62

      Chapter 5 Classic laser cutting machine wiring diagram 63

      5.1 ordinary laser cutting machine wiring diagram 63

      5.2 The wiring diagram of the double-heads mutual movable laser cutting machin 64

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Chapter 1 Summary

      1.1CNC system software profile

      PowerCut ordinary laser cutting control software is a laser cutting CNC quality goods, which is carefully orchestrated by famous R&D team with many years’ industry experience in   company. This software is easy to learn , with mature and steady movement control arithmetic , complete cutting process, friendly man-machine interface, and it can be applied in garment, acrylic, furniture and other non-metal laser cutting controls.

      1.1.1 composition of the control system

      The control system is composed of hardware(motion control card and parts) and softwares.

      Softwares’contents and file instruction

      File or child directory name

      Contents

      Instructions

      PowerCut folder

      Control system installation procedure

      Copy

      Driver folder

      Control card driver,

                       Form 1.1.1.1 software contents and file instruction

       

       

       

       

       

       

       

      Hardware equipment composition

      Item

      Quantity

      Instruction

      Control card

      1

      There must be several USB ports
      and network ports

      USB cable,
      network cable

      1

      Length within 3 meters

                        Form 1.1.1.2 hardware equipment composition

       

       

      1.1.2 software installation 

      Hardware requirements: CPU   Celeron more than 2.1G   
      memory: more than 256M   hardware: more than 20G

      Software requirement: Microsoft Windows operation system (Window2000, WinXP)

      1.1.2.2 board driver installation

      After connecting the board with the machine case, if the computer prompts finding the new hardware, and continue to prompt the hardware can not be used temporarily. At this time, the driver installation procedures are as follows: choose to install from list or appointed place.      图片1.png                            

       


       

      Then choose “Don’t search, I want to choose the driver procedure to install myself’图片2.png

       

      Then click install from the disk.图片3.png

       

       

      Now, pls click”browse”, and choose the file ftdibus.inf in the driver files; 

       

       

      Then confirm the file’s path:

       

      Then click “next step图片4.png

       

       

      At last, complete the installation of the board driver.

       

         

      1.1.2.5 install power cutting software

      After installing the above drivers, we can install PowerCut visual cutting software. Double click setup.exe installation package, and then click continously “next step” to complish the installation.

       

      Picture 1.1.2.5.2 the SilentUninstall under the installation folder

       

      1.1.3 Software features

      ? The interface is friendly, easy to learn and convenient to operate.

      ? The AI, BMP, PLT,DXF,DST and other many kinds of graphics data formats are all compatible.

      ? It can do multistage stratified processing and definite the output sequence.

      ? It can set the machining process and precision personalization, and has the laser head operation trajectory simulation display.

      ? It has a variety of path optimization functions and pause function during the processing process.

      ? A variety ways of graphics and processing parameters and its repeated usage,

      ? It has the function of processing time estimation,cost budgeting, and intelligent layout input.

      ? Unique double laser system intermittent work and their respective independently work and motion trajectory compensation control function.

      ? Set the processing starting point, working path, laser head dock position, etc., according to the different needs of processing

      ? It can be compatible with many kinds of communication mode. Users can adopt USB port communication or network communication according to the actual situation.

      ? Play the function of adjusting speed during the processing process.

      ? It has power-off protection function. System can remember the breakpoint if it is power-off suddenly during the processing.while restoring the power, system can find this breakpoint and continue to process.

      1.1.4 Interface instruction

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       


      Chapter 2  Menu bar

      2.1 File menu items

          Click ”file” icon on the menu bar or shortcut key Alt+F on the keyboard to open the file pull-down menu.

       

       

      ? New: Create new processing documents. You can press the shotcut key Ctrl+N on the keyboard or you can click the ”New” under the menu bar.

      ? Open : Open the file which is supported by the software. The supported file types includes:

       

       

      ? Save : Save the current editing graphics into PCT file. Press the shotcut key Ctrl+S or  icon to save the file.

      ? Save as: Save the current editing graghics as PCT file in other place.

      ? Save as laser file: Save the current editing graphics as laser processing CUT file.

      ? Exit: Exit powercut software. Press the shortcut key Alt+X to exit.

       

      Tips: The differences between PCT file and CUT file. PCT is the saving file format of PowerCut software, and can be opened and editted in the PowerCut software. CUT file is laser processing file. PCT file can be transferred to CUT file by PowerCut software, and then lead it in CNC system processing. The CUT file can not be opened and editted in the PowerCut software, and the PCT file can not be led in the CNC system processing.

       

      2.2 Edit menu item

      Click theicon on the menu bar or press the shortcut key Alt+E on the keyboard to open the Edit pull-down menu.

       

       

      ? Withdraw: Withdraw the last operation, and you can withdraw continously

      ? Repeat : the anti-operation of withdrawing, recovering to the last withdrawing operation.

      ? Cut: Cut the current selected object, then the selected object disappear, press shotcut key Ctrl+X.

      ? Copy: Copy the current selected object, then the selected object will remain, press the shortcut key Ctrl+C.

      ? Paste: Use together with the “Cut” and “Copy”, paste the object, press the shortcut key Ctrl+V.

      ? Editing mode: After selecting the graphics, click this icon, then appearing the editing points, move the editing points to edit the graphics. This function is mainly used to depict the graphics, such as the graphics on the processing interface:

          

       

       

       

       

      2.3 Set the menu items

       

      Click the  icon on the menu bar to open the “Set” pull-down menu.

       

      ? Parameters setting: Detailed instructions pls refer to the chapter 3 standard tool bar.

       

      2.4 View” menu item

      Click the  icon on the menu bar or press the shotcut key Alt+V on the keyboard to open the “Check” pull-down menu.

       

       

      Menu

       

      Color

       

      Modify

       

      Create

       

      Status bar

      2.5 Display” menu items

      Click the  icon on the menu bar to open the “View” pull-down menu.

       

      ? Choose : choose the graphics object, and the mouse shape is

      ? Translation : translate the graphics object, and the mouse shape is

      ? All : show all the graphics objects

       

       

       

       

      2.6 “Help” menu items

      Click the  icon on the menu bar to open the “Help” pull-down menu.

       

      Choose, Pop-up registration/upgrade window, showing the registration/upgrade information.

       

       

      ? Registeration method: After the original registeration code expired, acquiring the new registeration code from the manufacture. Input the new 16 bits registeration code into the box, and then click “register”.

      ? Upgrate method: Aquire the update documents from the manufacture, and then save to the computer appointed position. Click  while updating to find the updated file which deposited in the appointed place, and then click. Choose, pop out “about” window, which showing the company’s related information.

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Chapter 3 standard tool bar

      Standard tool bar realize the ordinary file editing operation, just as following picture showing:

       

      Picture 3-1

      3.1 New

      Correspond to the icon  on the tool bar. It is used to create a new graphics editing area. Also you can press the shotcut key Ctrl+N.

      3.2 Open 

      Correspond to the icon  on the tool barand the file format has DXF/PLT/AI/PCT/BMP/DST/JPG/JPEGthe shotcut key is Ctrl+O.

      3.3 Save

       

      Correspond to the icon  on the tool barsave the current editing graphics and processing parameters as PCT filethe shortcut key is Ctrl+S

      3.4 Lead in 

      Correspond to the icon  on the tool barlead the file to graphics editing area to edit it. This software support the format of DXF/PLT/AI/PCT/BMP/DST/JPG/JPEG etc.

       

      Tips : the differences between “lead in” and “open”: “Lead in”is to insert the graphics file to the current editing file, while “Open”is to reload a file.

       

      3.5 Lead out

      Correspond to the icon  on the tool bar this software can lead out three formats of  PLTDXFBMP. Input a file’s name and click “save”button.

       

      3.6 Cut

      Correspond to the icon  on the tool bar select the graphics object and then click this icon again.Then cut and revise the selected graphics. The shotcut key is Ctrl+X.

      3.7 Copy

      Correspond to the icon  on the tool bar select the graphics object and then click this icon. Copy current graphics to clipboard. The corresponding shotcut key is Ctrl + C.

      3.8 Paste

      Correspond to the icon  on the tool barclick this icon is to paste the copied

      or cutted graphics to current graphics editing area. The corresponding shotcut key is Ctrl+V.

      39 Withdraw

       Correspond to the icon on the tool bar, withdraw the last operation to the current file. The shortcut key is Ctrl+Z.

      3.10 Recover

       Correspond to the icon on the tool barrecover the last operation of the current file. The shortcut key is Ctrl+R.

      3.11 Translation 

        Correspond to the icon on the tool barmove the place of the current graphics editing area.

      3.12 Show all

      Correspond to the icon on the tool barshow all the objects to the maximum  extent in the graphics editing area.

      3.13 Display the page

      Correspond to the icon on the tool bardisplay the whole page in the graphics editing area.

       

       3.14 Fractionated gain

       

      Correspond to the icon  on the tool barbox select the fractionated gainedgraphics in the graphics editing area.

      3.15 Parameters setting

       Correspond to the icon  on the tool barset the system relative parameters.Below are the detailed instructions.

       

            System parameters setting page has four tabs: parameters display, technological parameters, device parameters and extending functions.

       

      3.15.1  parameters display tabs(see the above picture)

      ? Show grid: If selecting it, it will show grid in the graphics editing area.

      ? Grid space: set the space between the grids.

      ? Fine-tune: set the space of the precise movement.

      ? Paste trimming: set the space between copy, paste and original picture. It is at the 45°direction off the original picture.

      ? Language select: select the language

      ? Save : save parameters setting

       

       

       

       

      3.15.2 Technological parameter tabs

       

      ? Carving parameter setting: carving speed and backlash compensation are one-to-one correspondence. As the above picture showing, the speed of 100 are corresponding to the 1mm backlash compensation.

      ? Addition: Add one carving parameter. Move the bright high article to the parameters needed to revised, and double click it to revise this carving parameters.

      ? Cancel : Cancel one carving parameter. Move the bright high article to the parameters needed to be camceld and click it to cancle.

      ? Check, to make the setting of carving parameters effective.

      ? Small round cutting parameters setting: the cutting spead are corresponding to the small round. Improve the efficiency under the premise of ensuring the quality.

      ? Addition : Add one parameter of the small round cutting. Move the bright high article to the parameters needed to revised, and double click it to revise the small round cutting parameters.

      ? Cancel : cancel a small round cutting parameter. Move the bright high article to the parameters needed to be camceld and click it to cancel.

      ? Check, to make the setting of small round cutting parameter effective.

      ? Save : save parameters setting

      Backlash compensation examples:

       

      backlashbefore compensation

      After the adjustment of the backlash, download and process it to the effect as follows:

       

      Standard effect (after conpensation)

      3.15.3  Equipment parameter tabs:

       


      Equipment control:

      ? Machine format X: refer to the movement range of table X axis, that is, the max range of the laser head lateral movement(mm).

      ? Machine format Y: refer to the movement range of table Y axis, that is, the max range of the laser head longitudinal movement(mm).

      ? Machine format Z : refer to the movement range of the table Z axis. Mainly used to left and right push board machine. The Z axis range is effective push board length minus the X axis format(put X axis as an example, unit mm)continous feeding machine is out of the limitation of this parameter.

      ? X axis pulse equivalent : Relative to the each pulse singal, the displacement of the machine moving parts are called pulse equivalent. Also it is called smallest setting unit. Click  to set pulse equivalent, just as the following picture:

       

       

      The are two ways to calculate the pulse equivalent: The theoretical calculation and practical calculation.

       

      A、 theoretical calculation:

      The pulse quantity of one circle of motor: step motor: put the 1.8°, 32 subdivision driver as an example, the pulse quantity of one circle of motor: 360/1.8*32=6400 (pulse). Servo motor: put the panasonic servo motor A5 as an example, The motor turns a circle while the PR008 parameter default epistatic machine send ten thousand pulse.

       

      The real go length of motor tuning one circle: This value has been confirm,  while the machine is designed. Ask the value from the machine design department.

      Click, calculating the pulse equivalent automatically. Click, set this value to the X axis pulse equivalent.

       

      B、 Practical caculation:

      Theoretical length: draw a 100mm straight level. The theoretical length is 100mm to form processing file’s cutting.

      Real length: Actual length measured by the measuring instruments. Such as 50mm.

          Click, caculate the pulse equivalent automatically. Click, set this value to X axis pulse equivalent.

      ? Y axis pulse equivalent : the caculating method is the same as the X axis pulse equivalent.

      ? Z axis pulse equivalent : the caculating method is the same as the X axis pulse equivalent.

      ? Fixed fire power: set the preset(fixed power) power percentage.

      ? Fixed fire time: set the preset (fixed power) optical time.

      ? Pre-drive 1: set the laser tube 1 pre-drive power persentage.

      ? Pre-drive 2 set the laser tube 2 pre-drive power persentage.

      ? The max power: set the laser tube max power percentage.

      ? PWM frequency: set the PWM wave frequency. Pls set it according to the laser machine’s features.

      ? Back to original point speed : set the speed of backing to the original point.

      ? Board going speed: set the board going speed.

      ? Back to the zero axis: set backing to the zero axis.

      ? Water conservation: check the water conservation while checking, or do not check.

      ? Read the equipment parameters: read the setting parameters in the control device.

       

      Process setting:

      ? The movement speed(fast): set the speed of movement by hand.

      ? Coordinate system: choose the coordinate system(original point switch place, at the upper left or upper right).

      ? Start-up speed: set the start-up of the motor.

      ? Curve rateset the curve’s speed ratio. Bigger this value, faster the cutting curve. Otherwise it is slower.

      ? Travelling speed: set the machine’s empty running speed.

      ? X axis corner speed: set the speed when X axis go through the corner.

      ? Y axis corner speed: set the speed when Y axis go through the corner.

      ? Z axis speed: set the movement speed of Z axis.

      ? Z axis acceleration: set the acceleration when the Z axis moves.

      ? Save the parameter files: click this command, save the parameter files to the appointed place.

      ? Application: click this command, download the already parameters to the controller( must control the controller, otherwise, it will display wrong.)

      ? Read the parameter files: read back the parameters files saved before to the control system.

       

      3.15.4 Extern Fun

       

       

      Mul Head Machine: if the machine has two x-heads, you should select Mul head,

      Work Style:

              Single Style: if you only use the first head, select single Style

              Manual Style: this style will set two heads at the distance worklen.

                 Auto Style: this style will cut the graph by nest tool.

       

         Min Len: Two x-Headss min distance

         Work Len: Manual Style, two headss distance.

      X Pulse: x2-head pulse per mm;

         Two Head Y: Two x-heads differents in Y direction.

       

      Continue-Cut: if the graph is larger than the plane of the machine. Continue-Cut can auto break the graph int parts and cut.

      Auto-Break: if not select auto break, the graph will broken by the plane of the machine, if select, it will be smarted break.

      Trans-ErrR: continue-cut cut the connect of two section.

      Backup: Backup the control system para

      Restore: Restore the system para of Backup before.

       

       

       

       

      3.16 Array processing(virtual array)

       

      Correspond to the icon  on the tool barclick this icon to enter into array processing setting:

       

      ? Model width(X): cut rectangular geometry outside of the array graphic X direction. It is calculated by the software.

      ? Model height(Y) : cut rectangular geometry outside of the array graphic Y direction. It is calculated by the software.

      ? Number of columns(X) : set the array number of columns

      ? Numbers of rows(Y) : set the array number of rows

      ? The distance between columns: set the X distance of the array graphics

      ? The distance between rows; set the Y distance of the array graphics

      ? The width of the format(X) ; set the parameters and page

      ? The height of the format(Y) : set the parameters and page

      ? The real width : It is calculated by the software automatically.

      ? The real height : It is calculated by th esoftware automatically.

      ? Full format arrangement: click  button, arrange the full format as the virtual array way. Then revise the original picture, and all the graphics will be revised automatically.

      ? Preview : click  button to preview the array graphics as the set parameters.

      ? Clear : click  button to clear the related parameters of the array set.

      ? Cancel : click  button to cancel the array operation.

      ? Confrim : click the  button to confirm the array operation.

      Notice: After use the function of the array processing once, click the button , then click  button again to clear related array parameters. Otherwise, it will array automatically after opening up the second file.

      3.17 Path prewiew.

          Correspond to the icon  on the tool barclick this icon to preview processing path.

       

       

       

       

       

       

       

       

       

       

      Chapter 4 Grapgics creation/ Revise the tool bar

      .1 Create the tool bar

      Graphics creation bar is used to create common graphics, such as straight line, curve, round, square, etc. Just as the following picture showing:

       

      ? Choose : correspond to the icon  on the tool bar, click this icon, the mouse stays in the state of selecting.

      ? Broken line: correspond to the icon  on the tool bar. Draw arbitririly several continous broken lines. Click the left button of mouse. Move to the appointed place by mouse, then click the left button again to complish the editing of one angle line. If you want to end the current editing, pls click the right button of the mouse.

      ? Round : correspond to the icon  on the tool bar, click this icon, the press the left button and push it to draw a round.

      ? Three Point Circular Arc: correspond to the icon  on the tool bar, click this icon,and press the left button of the mouse to confirm the center of the circle. Drag the mouse to a place and click it to confirm the arc radius, and then drag the mouse and click it to confirm the arc. Draw the radius firstly and then draw the arc.

      ? Arc : correspond to the icon  on the tool bar, click this icon and press the left button to confirm the arc starting point. Drag the mouse to a place and click it to confirm the finishing point. Then drag the mouse and click to confirm the arc. Draw the starting point and finishing point firstly and then draw the arc.

      ? Ellipse : correspond to the icon  on the tool bar, click this icon and press the left button to confirm the center of the ellipse. Drag the mouse to a place and click it to confirm the X direction diameter of the ellipse. Then drag the mouse per the Y direction and click it to confirm the ellipse.

      ? Rectangle : correspond to the icon  on the tool bar click this icon and drag the mouse to a place to draw a rectangle with any size.

      ? Word : correspond to the icon  on the tool bar. This function is mainly to add word on the graphics and edit it. Click this button, and it will appear the following window:

       

      Start:  Modify the start point of the obj;

      Break: Break the obj into two section

      Rotate: Rotate the obj

      Plane:  Create the plane obj

       

      .2 Revise the tool bar

       

       

      ? Location setting: correspond to the icon  on the tool bar. Click this icon and it will bounce up the window of choosing objects’ reference points, as following picture:

       

       

      When choosing one or serveral objects, the chosen objects would produc a edit box made up of 8 square points and one X. Put the mouse on X, and press the left button to drag the mouse. You can drag the selected object and put the mouse on the any square point among the 8 square points. Press the left button to drag the mouse to enlarge and lessen the selected dobjects. The selected 8 square points and a X correspond to the 9 rounds in the above picture. Select the round at different place. Then the  coordinate will change accordingly.  shows the geometric attribute, and input the data revised objects’ geometric attribute in the edit box.

      ? Proportion lock/unlock: correspond to the modification icon  on the tool bar. Modify the geometric size of one direction when the proportion is locked, and then the geometric size of another direction would change as the same proportion. After the proportion was unlocked, it can not affect each other to modify the geometric size.

      ? Rotation : correspond to the icon  on the modification tool bar. Input the rotation angle in the edit box. Click this icon, and the object will rotate as the rotation angle.

      ? X mirror

      Correspond to the icon  on the tool bar, click this icon. The orininal graphics turn right 180 degree using the verticle line of the center of this graphics as axis, as following picture showing:

       

      ? Y mirror

      Correspond to the icon  on the tool bar, click this icon. The orininal graphics turn down 180 degree using the horizontal line of the center of this graphics as axis, as following picture showing:

       

       

      ? Retraction or external expansion

      Correspond to the icon  on the tool bar, select the vector graphics needed to be expanded and retracted. Click this icon and it will appear the following window:

       

      Check the needed options and parameters. Click it to confirm, and it will generate the processing graphics which is parallel with the original graphics, just as the following picture showing:

       

      6-6

      If selecting the retraction, graphics will narrow the internal value inward. If selecting exteral expansion, the graphics would expand. Notice: the rectration value can not excel the radius of the graphics.

      ? Array( real array): correspond to the icon  on the tool bar. Click it and it will bounce up the following dialogue box:

       

      Number of columns: the colum number of the array

      Number of the rows: the row number of the array

      Space between columns: the column space of the array

      Space between rows: the row space of the array

      Direction selection of the array: the array at the upper left/upper right/below left/below right side of the original graphics.

      Preview : preview the effect of the array

      Confirm: confirm the array

      Cancel : cancel the array

      Remarks: the differences between array processing ( virtual array) and array real array. There is only matrix is entity in the virtual array, and other arraied out graphics are only for showing. It has no entity, it moves with the matrix when moving and modifying. The main advantage of it is that its data amout is small. The objects listed by the real array are entities, and every entity can be edited separately.

       

      Smooth  smooth the lines by b_spline

       

       

      Del Repeat Line  Delete the line which is same with other

       

      Nest : Two x-heads Auto Style use nest tool to create the cutting data.

       

      Auto full Nest: two x-heads auto style, nest full machine plane

      High, Width: the High or width of Model.

      All High, All Width:  the total high(width) of the all nested object.

      R-Up, R-Dwon: Nest Direction

      RowNum: the count of Rows

      ColNum: the count of Cols

      Row Gap: the gap of rows

      Col Gap: the gap of cols

      Move Len: when you click the move button to change the Row Gap or Col gap.

      Left, Right, Up, Down:  raising the value of the gap

       

       

       

       

       

       

      Chapter 5 Coverage/Alignment tool bar

      .1 Coverage tool bar

      The function of the coverage tool bar is to set the layers of the processing objects.

      Adopt different color to show different layer,

       

      Select the graphic object, and then click the color icon on the layer tool column. The graphic object will be atratified. The current software support the nine layer color setting. Each layer can separately set up different processing technology. The detailed introduction are prescribed in the latter parts.

       

      .2 Alignment tool bar

      The alignment tool bar are used to align single or mutiple graphics objects. Alignment tool bar are as follows:

       

      ? Align center: correspond to the icon  on the tool bar, the selected objects align wholly with the format center.

      ? Align left: correspond to the icon  on the tool bar, align left refer to the most left object.

      ? Align right: correspond to the icon  on the tool bar, align right refer to the most right object.

      ? Align upper: correspond to the icon  on the tool bar, align upper refer to the most upper object.

      ? Align below : correspond to the icon  on the tool bar, align below refer to the most below object.

      ? Horizontal center aligment: correspond to the icon on the tool bar,  align central used the all selected horizontal center line as benchmark.

      ? Verticle center alignment: correspond to the icon  on the tool bar, align central used the all selected verticle center line as benchmark.

      ? Center alignment: correspond to the icon  on the tool bar, align central used all the selected objects center points ad benchmark.

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Chapter 6  Working panel

      Working panel includes optional equipment, layer management, device control and control by hand, etc. Working panel tabs can be fixed or hiden automatically by clicking the right constant wind nail .

       


      6.1 Optional equipment:

      Click button , and it will appear the device connecting dialogue box, just as following picture showing:

       

       

      ? Equipment list: list the equipment which is available to be connected, including types, equipment name, address, state and other information.

      Move the high lighted article to the corresponding entries, and click or double click the button  to connect the equipment.

      Move the high lighted article to the corresponding entries, and click the button  to switch off the equipment. Click the button  to refresh the equipment and connect the page.

       

      6.2 Layer management

       

      Layer management includes layer color, processing mode, speed, power, output or not and layers’ moving up, down, top, and bottom selection operation command button.

      ?  Click a color: the layer information highlighted, click the button , this layer go up a layer; click button , this layer go down a layer; Click  button, this layer moves up to the top; Click  button, the layer moves to the bottom; Click  button, this color button is selected.

      Remarks: The file’s processing order is based on the layers’ sequence to change the layeers’ sort order, and that is to change the processing order. Click  button, this layer moves down to the bottom;  Click  button to select this color layer object.

      ? Double click a color layer to open layer information seting box, just as following picture showing:

       

      ? Double click a color layer information setting box, all the layers and sequences will appear on the left, and the current layer related information will appear on the right.

      ? The current layer color: show the current selected layer’s color. Click the different layers odn the left, the current layer will change correspondingly.

      ? Working mode: click the pull-down button on the right, there are 3 working modes in total, just as following picture showing:

       

      Output : check the output to output this layer object when generating laser processing files. If do not check the output, this layer object won’t output, and this layer object will not be processed during the process.

        Pause : check the pause. The machine pause while processing this layer, then press start button to process.

      ? Cutting, hooking and punching parameters’ setting:

      l Processing speed: the speed of the processing graphics object

      l Processing acceleration: the acceleration from the starting speed to the processing speed.

      l Laser energy 1: the laser tube 1 highest speed correspond to the laser power percentage during processing.

      l Corner laser energy 1 : the laser tube 1 corner speed correspond to the laser power percentage during processing.

      l Laser energy 2:the laser tube 2 highest speed correspond to the laser power percentage during processing.

      l Corner laser energy 2 : the laser tube 2 corner speed correspond to the laser power percentage during processing.

      l Close Delay: if use server motor, the motion is delay, then the cutting is not closed when cutting the closed obj,  the Close Delay is useful to this.

      ? Carving parameters setting:

      l Carving speed: the speed of carving the processing graphics.

      l Carving acceleration: the acceleration from the starting speed to the processing speed while processing.

      l Carving step space: it is refer to the distance between processing row and row.

      l Carving energy 1: the laser power percentage of the laser tube 1 carving speed while processing the bitmap.

      l Carving energy 2: the laser power percentage of the laser tube 2 carving speed while processing the bitmap.

      l Carving mode: there are two carving modes for choice: horizontal unidirectional carving and bidirectinal carving. The horizontal unidirectional carving refers to light dipping while carving from left to right direction. And no light dipping while carving from right to left. The horizontal bidirectional carving refers to light digging from both sides.

      Click button , and confirm the layer information setting.

      Click button , and quit the layer information setting.

      6.3 Equipment control

      Equipment control includes start, stop, etc, just as the following picture showing:

       

       

       

      File Handling: down the cutting data to the card

      Start/Pause: Start Or Pause the motion

      Stop: Stop the motion

      Frame: Show the frame of all object.

      Home: Machine go to home positon

      Laser: Laser out.

      6.4 Manual control

       


       

      ? X+X-Click this button to control the X axis positive and reverse movement.

      ? 

      ? Y+Y-Click this button to control the Y axis positive and reverse movement.

      ? Z+Z-Click this button to control the Z axis positive and reverse movement.

      ? Accurate movement:  input the value and then press the direction button, and the laser head will move at this direction.

       

       

       

       


      Bottom software/hardware operation instruction and line connection

       

      Chapter 1 Summary

       

      1.1System function

           PowerCut laser CNC cutting system is mainly used in laser engraving , cutting and marking.

           System’s operation and display are all having step function window to reminder. For example: under the main window menu , after calling a certain function, the system will bounce up this function’s child window menu. Step setting according to the operation instruction.

      1.2System features

      1Embedded industrial host: high performance ARM processor, 4 inch high brightness industrial LCD screen, 4 inch resistence touch screen, support touch screen control.

      2Strong system reliability, strong anti-jamming ability

      3External interface: USB2.0, RS232, 100M network interface

      4The system provide road 2 photoelectric isolation input, and road 2 photoelectric isolation output.

      1. Linkage shaft number: 3 axises

      2. Working temperature: 0 - +40, atorage temperature 25- +60

      1.3Software function

      1. Use one key to switch the Sino-British double language version.

      2. Support the file format cut.

      3. There is power-off protection function. If it is power off during the processing , system can remember this breakpoints, and find the breakpoints to continue processing,

      4. Conduct the speed adjustment function in the course of processing.

      5. Registration code protection function

      6. Bottom software U disk upgrate function.

      7. continous feeding function.

      8. left-right direction push board function.

      9. double-head mutual movable function

      10. network setting function

       

       

      Chapter 2 Operation instruction

      2.1 Operation panel and press buttons’ function introduction

         2.11 Operation panel

       

       

      2.1 operation panel

        2.12 Key function introduction

             

      1. LaserkeyLaser preset key, and test the laser usage. Release light once while click once. It is used to adjust the laser.

             2.  (File) keyEnter into the memory file information setting interface. Pressing it with long time can enter into file information interface.

             3.  (Set) keyEnter into menu set, and set the parameters.

             4. U DiskkeyEnter into U disk file operation interface.

             5. originkeyIt is used to make the laser head back to the original point.

             6. Boxkeyto start the frame preview.

             7. EnterkeyDefinition key to agree the current operation. Press this key with a long time in the file processing interface, and it will appear a shortcut as follow picture:


             8.  (Sec) keydefinition key, used to cancel operation and return to the last interface.

             9. Stop“Reset” key, used to stop the operation of the machine. When long pressing the key  in the processing interface, there will be a dialogue box bounced up, as the picture:  .  is the start/pause key. When the equipment is in the state of free or pause, press this key to carry out the function of start. Click this key in the processing state to carry out the pause function.

             10.  (function) keyused to move the X axis and Y axis. Under other interfaces, it can also be used to move the curser up and down to select the menu. Adjust the speed at true time under the processing interface.

             11.  axis toggle key: Press it to shift to axis X2 or axis Z. Control the X2 on the left and right direction. Control the Z  on the direction of up and down. Press the Z once to cancel X2 axis or Z axis.

          Reminder: X2 axis refers to the second laser head on the X axis of the double heads mutual movable machine.

       

         2.2 System main menu introduction

       

         2.21 Boot interface

             Boot interface, as the picture(2.21)

               

      2.2 boot interface

       

       2.22 Standby interface

           After the completion of the initialization, enter into the standby interface.(as picture 2.3)

       

       

      2.3 standby interface

          Picture 2.3 placeA shows the real ordinate value of the X/Y axis.

          Picture 2.3 place B shows the graphics of the processing files.

          Picture 2.3 place C shows the estimated using time of the processing graphics.

          Picture 2.3 place D shows the system’s working state.

          Picture 2.3 place E shows each parameter while the system processes, including name, amount, complete, interval, power, speed.

              Name: the name of the processing file

              Amount: the processing times of the processing files

              Complete: the completion times of the processing files

              Interval: the time interval between the ending time of this process and the starting time of the next process while processing the files.

      Power:  the power mode used by the laser light signal while processing the files.

      Speed: the speed percentage while processing files press the X direction key to adjust the speed at real time while processing the files

       

      2.23 Files’ interface

             Press the “File” key on the standby interface to enter into the file operation interface. As the picture showing:

      2.4

      Picture 2.4 file interface

         Picture 2.4 place A shows the graphics of the selected files.

         Picture 2.4 place B shows the files’ name list included in the memory.

         Picture 2.4 place C shows system restored files’ parameters, separately including used, unused memory, documents amount.

      Used: the capacity occupied by the restored files.

      Unused: the rest capacity except the capacity occupied by the restored files.

      Files: the current amount of the restored files by the system.

      Press “up”, “down” keys to check the files. Press the key “confirm” on the operation panel to select the files. Press “ESC” to be back to the file interface. Press “right” key and it will appear the operation iterms of the current files, as picture 2.5:

       

                              Picture 2.5 file operation items

       

      1. choose: move the curse to this place to press the key “confirm” or “right” key, showing to regard this file as processing files.

      2. information: select the file’s parameter setting ( the methods to modify the parameters refer to the chapter 2, 2.26 ) as the picture 2.51 and

      picture 2.52:


                              picture 2.51 file information (1)

       

      Picture 2.52 file information2

         1speed ratio: the current speed percentage, the range is from 1 to 100.

      2power mode: the working way of the laser power. It can be divided into “manual” and “automatic” . The mode “automatic” is to process according to the filr power setted by the current file. “manual” mode is to process according to the “manual power”.

      3maximum power: the laser power value while the current file stays at the “manual” power mode. The range is from 0.0 to 100.00.

      (4) minimum power: the laser’s minimum light power while the current file stays at the “manual” power mode. The range is from 0.0 to 100.00.

      (5) process amount: the needed processing times of the current files, and the range is from 0 to 20,000.

      (6) completion times: the processing times completed by the current file, and the range is from 0 to the 20,000.

      (7) time interval: When the files are processed many times, the interval time between the ending time of this process and the starting time of the next process. The unit is second, and the range is from 0 to 999.

      8starting mode: The starting point’s beginning way of the current processing files, including fixed point, immediate, self definition and four kinds of origin.

            Fixed point: regard the parameters setted by anchor point X and anchor point Y in the parameter set as the starting of processing.

            Immediate: Regard the place where the laser head locates currently as the processing starting point.

      .      customization: Regard the starting point X and starting point Y’s parameters in the file information as the processing starting point.

      Origin point: Regard the machine origin as the processing starting point.

             (9) starting point X: Set the starting point’s ordinate while beginning processing, and the range is from 0.0 to 9999.999. The starting mode is effective while it stays at customization mode.

      10starting point Y: Set the starting point’s ordinate while beginning processing, and the range is from 0.0 to 9999.999. The starting mode is effective while it stays at customization mode.

      11Dock mode: the dock way of the laser head after the completion of the  processing, including starting point, customization, origin point.

           Starting point: The laser head parked in the location setted by the starting point X and starting point Y after the completion of the processing.

           Customization: The laser head parked in the location setted by the dock point X and dock point Y after the completion of the processing.

           Origin: The laser head docks at origin after the completion of the pocessing.

      12Dock point X: Set the X axis ordinate where laser head docks after completing the processing. The range is from 0.0 to 9999.999, and it is effective when the docking mode stays at the customization mode.

      13Dock point Y: Set the Y axis ordinate where laser head docks after completing the processing. The range is from 0.0 to 9999.999, and it is effective when the docking mode stays at the customization mode.

       

      3. Cancel: refer to cancel the selected files

      4. Write into U disk: refer to copy the selected files to the U disk

        Press “confirm” key to confirm, and press the “quit” key to cancel. Then it will return to the last interface.

       

      2.24 U disk file interface

          After inserting the U disk, directly press the “U disk” key on the operation panel to enter into the U disk interface. As the picture 2.6

       U disk file

      Picture 2.6 U disk interface

       

                 Picture 2.6 place A shows the files’ graphics

                 Picture 2.6 place B shows the file name list of the file which is available to copy in the U disk.

                 Picture 2.6 place C shows the system ‘s operation state and the files’ number of the file which is available to copy.

                            U disk: the system is under the state of the U disk

                            File number: the file number in the U disk which is available to copy and process.

         Press “up”, “down” to select the files. Press “ESC” to quit this interface. Press “right” key to bounce out the this file’s operation item, as picture 2.7

       


      Picture 2.7 file operation item

       

      1. Copy: refer to copy this file to the system, and click the “right” key on the operation panel to copy the current file to the restoration area. And set as the current processing files.

      2. Cancel: refer to cancel the selected files. After this step, click the “right” key on the operation panel to cancel current files.

      2.25 Set the interface

          Press the key “set” on the operation panel to enter into the setting interface, as picture 2.8. The setting interface has three pages. Click “down” key on the option five, and the system will turn to the second page automatically, as picture 2.9. Just as the above operation, click “down” key to enter into the third page, as picture 2.10.

       

      Picture 2.8 set the first page of the interface

       


      Picture 2.9 set the second page of the interface

       


                      Picture 2.10 set the third page of the interface

       

      1. LanguageTransfer to show the language, and it has “Chinese” and “English” for choice.( the transfer method pls refer to the chapter 2 part 2.26)

      2. movement speed: Refer to the laser head moving speed. The bigger the value, the faster the speed. The range is from 0 to 500.

      3. frame speed: the speed of going along the frame. The bigger the value, the faster the speed. The range is from 0 to 500.

      4. Anchor point X: Set the starting point’s X axis ordinate when the laser head begins to process. The range is from 0.0 to 9999.999. And it is effective while the starting mode is positioning mode.

      5. Anchor point Y: Set the starting point’s Y axis ordinate when the laser head begins to process. The range is from 0.0 to 9999.999. And it is effective while the starting mode is positioning mode.

      6. IP address: System IP address number. It will be used while connected with the computer.

      7. Registration code: The registration code is provided by the supplier, and input it to the tip area in turn. The registration code can be made for a certain time randomly. The system will stop the using after the expiring. If reminding “the registration is expired”, you can contact with supplier, and continue to use after getting the new registration code.

      8. Formatting flash: formatting all the processing files in the system.

      9. Loading parameter files: Use the U disk to load the upper parameters.(the detailed situation pls refer to the upper layer software instruction.)

      10. System upgrating: Use the U disk to upgrade the system’s current software.(Only refer to the bottom layer software’s upgrading)

      11. Track display : Display the track of the processed graphics. There are two kinds: point and line.

      12. Z axis speed: It refer to the movement speed of the Z axis. The bigger the value, the faster the speed. The range is from 0 to 500. ( The methods of changing the parametrs pls refer to the chapter 2 part 2.26)

       

      2.26 The methods of modifying the parameters

       

            1. modidy the language type parameters

                 Move the indicating icon  to the font of the options which need to be modified. Click the key “right” on the operation panel. Then the current option enter into the modification mode. And then click the key “up” or “down” to change the options in the dialogue box. Click the “confirm” button after modification to change the state of the language type parameters.

       

      3. modify the digital type parameters

      Double-click the digital type options’ dialogue box on the touching screen. It will appear the digital dialogue box, as picture 2.11. Then click the number you need and click “confirm” to change the digital type parameters’ value you selected.

                  

       

      Picture 2.11

       

       

       

      Chapter 3 The instruction of the installation and wiring

       

      3.1 Installation size

       

       

      3.2 Wiring instruction

         3.21 Interface board

       

      3.22 Wiring diagram

      1. power supply port wiring diagram

      1isolation mode

       

       

       

      2. XX2Y Z axis port wiring diagram

         1single port

       

       

        

       

       

       

      2. Outlet port wiring diagram

       

       

      3. Outlet port wiring diagram

       

       

      4. laser control port wiring diagram

       

      1digital control

       

       Low level light out

      5. Limit signal wiring diagram and reset signal wiring diagram

       

       

       

         

       

      33 Port definition instruction

      3.3.1 Power supply signal ( This system adopt the direct current 12V-24V to supply the power.)

       

      12V power supply interface JP1 in the system ( switch power supply interface port)

      Pin

      Definition

      1

      D24V    Inner 24V power supply positive (input)

      2

      DGND   Inner 24V power supply negative(input)

       

      3

      24V    outer 24V power supply positive (input)

      4

      GND   outer 24V power supply (input)

       

      3.3.2 U disk interface port

      Marking U-disk. You can directly insert the U disk to read and write.

       

      3.3.3 PC interface port

                Marking PC. You can use the USB connection wiring to connect the computer to read and write the files.

      3.3.4 Network port

      Marking the NETWORK. You can use the network cable to connect computer to read and write the files.

      3.3.5 port definition

      MOTORX 1X2 port definition

             Pin

      Definition

      1

      D5V    outer The 5V power supply positive (output)                    

      2

      X1PUL   X axis pulse signal (Differential signal negative terminal) (output)

      3

      X1DIR   X axis directional signal (Differential signal positive terminal) (output)  

      4

      D5V      outer The 5V power supply positive (output)

      5

      X2PUL  X2 axis pulse signal (Differential signal negative    terminal) (output)

      6

      X2DIR    digital signal

      MOTORYZ port definition

      Pin

      Definition

      1

      D5V    outer The 5V power supply positive (output)   

      2

      YPUL  Y axis pulse signal (Differential signal negative terminal) (output)

      3

      YDIR  Y axis directional signal (Differential signal negative terminal) (output)  

      4

      D5V    outer The 5V power supply positive (output)  

      5

      ZPUL  Y axis pulse signal (Differential signal negative terminal) (output)

      6

      ZDIR  Y axis directional signal (Differential signal negative terminal) (output)  

       

      X1 LIMITport definition

      Pin

      Definition

      1

      24V   24V power supply positive(output)

      2

      HOMEX   X origin and X negative limit multiplexing signal (input)

      3

      LIMITX  X axis positive limited position signal (input)

      4

      AGND    power supply positive(output)

       

      X2 LIMIT port definition

      Pin

      Definition

      1

      24V   24V power supply positive(output)

      2

      HOMEX2  X2 origin and X negative limit multiplexing signal (input)

      3

      LIMITX2  X2 axis positive limited position signal (input)

      4

      AGND    power supply positive(output)

       

       

      Y LIMIT port definition

      Pin

      Definition

      1

      24V   24V power supply positive(output)

      2

      HOMEY   Y origin and Ynegative limit multiplexing signal (input)

      3

      LIMITY  Y axis positive limited position signal (input)

      4

      AGND    power supply positive(output)

       

       

      Z LIMITport definition

      Pin

      Definition

      1

      24V       24V power supply positive(output)

      2

      HOMEX  Z origin and Z negative limit multiplexing signal (input)

      3

      LIMITX   Z axis positive limited position signal (input)

      4

      AGND    power supply positive(output)

      LASER1 port definition

      Pin

      Definition

      1

      AGND     12V power supply positive(output)

      3

      TTL-      realeasing light can show the negative signal(output) (light: 0V,light off 5V)

      4

      TTL+     realeasing light can show the positive signal(output) (light: 0V,light off 5V)

      5

      PWM+    light signal ( differential signal positive port)                                                     

      6

      PWM-     light signal ( differential signal negative port)  

      7

      OUT      The light analog signals (output) (0 to 5 v)

      LASER2 port definition

      Pin

      Definition

      1

      AGND     12V power supply positive(output)

      3

      TTL-      realeasing light can show the negative signal(output) (light: 0V,light off 5V)

      4

      TTL+     realeasing light can show the positive signal(output) (light: 0V,light off 5V)

      5

      PWM+    light signal ( differential signal positive port)                                                     

      6

      PWM-     light signal ( differential signal negative port)  

      7

      OUT      The light analog signals (output) (0 to 5 v)

       

       

      INPUT port definition

      Pin

      Definition

      1

      24  24V power supply positive(output)

      2

      IN1   foot switch(input)

      3

      IN2   water protection switch(input)

      4

      IN3   Door protection switch(input)

      GND  power supply (output)

       

       

       

      OUTPUT port definition

      Pin

      Definition

      1

      24V    24V power supply positive(output)

      2

      OUTP1   blowing(output)

      3

      OUTP2   paint brush (output)

      4

      GND     power supply(output)

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Chapter 4 Common problems instruction

       

      4.1 the computer connecting problems

               The problems’ performance phenomenon:

      1. remind the communication breakdowns

      2. It can not read and write the parameters.

      3. The transferring files is ineffective.

      Solving steps:

      1. To check if the USB line is connected correctly and good. To check if the port of the USB line is connected with the PC.

      2. To check if the USB driver program are installed rightly. To install the driver program again.

      3. Insert a good USB port again from the computer.

      4. Close the machine power one minute and open it again.

      5. Restart the computer, and connect equipment and the computer to the ground.

      6. Exchange a computer.

       

      4.2 U disk reading and writing problems

               Click the U disk files and showing “the U disk is blank or wrong”

                    Answer: U disk error

                    Resolution:

                    Step 1: check the U disk if it is correct

                    Step 2: replace another U disk

      Chapter 5 Classic laser cutting machine wiring diagram

      5.1 ordinary laser cutting machine wiring diagram

       

       

      5.2 The wiring diagram of the double-heads mutual movable laser cutting machin

       

       

      成人午夜剧场,协和影视午夜剧场 第8色 男人最爱的网站 888奇米影视第四色米 秋霞伦理在线手机看片 音影先锋资源男人站 欧美大胆少妇图 熟美妇 在线免费伦理电影 狠狠干久久草蕉 国产成-人-综合 日日夜夜撸在线影影院 手机看片福利盒子永久 奇米 影视 色第四色视频区 玫瑰成人社区 成人影片人人看免费 夜夜啪天天操 人人操人人干 伦理电影2499伦理片 俺去啦俺去也 亚洲来色色视频 亚洲欧美中文日韩v在线 干黑丝 我被狠狠操 韩国伦理电影在线伦理 俺去啦俺去也俺来啦 亚洲va天堂图片 色五月色人阁婷婷 射白丝袜 影音先锋资源 ck伦理电影 一本道在线伊人大香蕉 三级黄rlri看三级黄 激情春色校园小说 九七超碰资源站总站 干熟女亚洲在线视频 神马影院dy888午夜电影通 色哥哥78 手机在线视频网站色 奇米影视777影音先锋在线 97riri 天天看 我日日夜夜在路口 协和影视午夜剧场 奇米影视 新第四色官网网址 狠狠干久久草蕉 国产成-人-综合 日日夜夜撸在线影影院 手机看片福利盒子永久 奇米 影视 色第四色视频区 玫瑰成人社区 大香蕉网站 夜夜啪天天操 人人操人人干 伦理电影2499伦理片 俺去啦俺去也 亚洲来色色视频 亚洲欧美中文日韩v在线 干黑丝 我被狠狠操 韩国伦理电影在线伦理 俺去啦俺去也俺来啦 亚洲va天堂图片 色五月色人阁婷婷 射白丝袜 影音先锋资源 ck伦理电影 一本道在线伊人大香蕉 三级黄rlri看三级黄 激情春色校园小说 九七超碰资源站总站 干熟女亚洲在线视频 神马影院dy888午夜电影通 色哥哥78 手机在线视频网站色 奇米影视777影音先锋在线 97riri 天天看高清影视在线 日日夜夜剧情 成人午夜剧场 奇米影视盒 奇米第四色官网网址 97爱色 欧美色情在线 日日夜夜影院在线播放 手机看片福利永久国产 777奇米影视四色 色第四色奇米888 妖色成人 海量高清短视频APP 日日日夜夜在线视频 亚洲免费在线影院 性伦理电影 俺去啦官网 六月婷婷丁香五月首页 亚洲欧美中文日韩 狠日狠干日曰射 福克斯电影院 免费的伦理电影 俺去啦电影 亚洲va视频 深爱五月天激情 亚洲欧美日韩狼人射 影音先锋看片网站 伦理电影百度影音 伊人大香蕉久久网 2014av手机天堂网免费 五月天亚洲图网站 一本道导航 日本无码 午夜电影播放器 色哥哥和妹妹 91视频网站国外 奇米网影音先锋 444 一本道久草6高清 天天看高清影视在线 日日夜夜剧情 成人午夜剧场 奇米影视盒 奇米第四色官网网址 97爱色 欧美色情在线 日日夜夜影院在线播放 手机看片福利永久国产 777奇米影视四色 色第四色奇米888 妖色成人 海量高清短视频APP 日日日夜夜在线视频 手机看片?福利永久 性伦理电影 俺去啦官网 六月婷婷丁香五月首页 亚洲欧美中文日韩 狠日狠干日曰射 福克斯电影院 免费的伦理电影 俺去啦电影 亚洲va视频 深爱五月天激情 亚洲欧美日韩狼人射 影音先锋看片网站 伦理电影百度影音 伊人大香蕉久久网 2014av手机天堂网免费 五月天亚洲图网站 一本道导航 日本无码 午夜电影播放器 色哥哥和妹妹 91视频网站国外 奇米网影音先锋 444 一本道久草6高清 天天看高清影视在线 日日夜夜剧情 成人午夜剧场 奇米影视盒 奇米第四色官网网址 97爱色 欧美色情在线 日日夜夜影院在线播放 手机看片福利永久国产 奇米影视盒首页 奇米色777米色第四色 绿色成人电影 好看视频 日日夜夜鲁 妈妈鲁播放 1024基地手机看片旧版 奇米影视777影音先锋 俺去也俺去啦 丁香五月天的最新地址 亚洲欧美日韩系列 狠狠干日日射在线视频 激清电影在线 免费成人伦理电影 俺去啦电影网 亚洲va天堂 激情五月色人阁 天天曰夜夜回 色播五月天 2018年 韩国伦理电影 伊人大香蕉久久网百度 色和尚5777ww五月 亚洲图片欧美电影 加勒比一本道在线久久 日韩有码 三级a午夜电影 色哥哥妹妹综合网 色视频网站大全 奇米奇米色影院 三岛香奈 天天在线视频 我在豪门的日日夜夜 午夜剧场 皇网站 你懂的视频 第四色最新的网址 97资源站在线视频 亚洲欧美中文日韩视频 日日夜夜影院在线影院 手机看片5 奇米影视盒首页 奇米色777米色第四色 绿色成人电影 好看视频 日日夜夜鲁 妈妈鲁播放 1024基地手机看片旧版 奇米影视777影音先锋 米奇影院第四色中文 午夜成人影院 亚洲欧美日韩系列 狠狠干日日射在线视频 激清电影在线 免费成人伦理电影 俺去啦电影网 亚洲va天堂 激情五月色人阁 天天曰夜夜回 色播五月天 2018年 韩国伦理电影 伊人大香蕉久久网百度 色和尚5777ww五月 亚洲图片欧美电影 加勒比一本道在线久久 日韩有码 三级a午夜电影 色哥哥妹妹综合网 色视频网站大全 奇米奇米色影院 三岛香奈 天天在线视频 我在豪门的日日夜夜 午夜剧场 皇网站 你懂的视频 第四色最新的网址 97资源站在线视频 亚洲欧美中文日韩视频 日日夜夜影院在线影院 手机看片5 奇米影视盒首页 奇米色777米色第四色 绿色成人电影 好看视频 日日夜夜鲁 妈妈鲁播放 1024基地手机看片旧版 奇米影视777影音先锋 米奇影院第四色中文 午夜成人影院 2019情侣自拍视频 亚洲性夜夜谢在线看 快播资源网址大全 免费在线观看伦理电影 俺去啦久久草在线视频 超碰视频 色妞 牛牛超碰免费视频在线 久久热在线视频精品 草榴成人社区 久久电影院 236最新伦理宅宅电影 2019长得超级漂亮的av 2019午夜在线福利影院 2019人人摸人人碰 2019年欧美电影大片 2019国外app推荐 2019.苦涩的收割 2007色尼姑丁香五月婷 13cao视频在线观看 1024手机在线观看基地 0855午夜福利伦理电影 妈妈是av女星续 日本亚洲免费在线 ri69在线超碰在线视频 成娱情色导航艳门事件照片 在线视频 午夜伦理片 色情文学 色戒完整版 日本三级片 碰免费 伦理在线 鲁大妈VA视频 牛牛超碰免费视频在线 青青草视频在线观看 日日夜夜撸在线视频 手机版青青青免费观看 五月天婷婷开心网站 亚洲人成电影网站色 一本道无码在线av观看 22sss 电影快播 2019在线观看懂得 2019天天啪,天天爽中文 2019奇米色情网第四色 2019能直接看的a站 ftp 2019国产能进a站 2019 888奇米影院四色 1级片电影免费看 127小时免费观看 1024手机色色在线观看 00271在线免费电影 人人干全免费手机视频 欧美10大经典情色电影 日本著名av女佣名字 抚摸骚嫂子的乳头 在线av 天天撸一撸 色情网 色和尚 日本av女优 欧美色情 伦理片 久久小说下载网 久久热 家庭伦理小说 黄色录像 韩国伦理片 成人网 成人电影 超碰人人最新上线视频 av网站 1024大香蕉A片 2019手机在线视频你懂 2019欧美限制电影 2019免费微信色群分享 2019福利小视频qq空间 2016影音先睡中文字幕 1插花综合菊花网 123免费视频在线看 1024手机看片福利永久 00271俺去也资源 英国超碰老奶奶视频 免费看言情小说全集在那里 97超碰人妻视频免费公开视频在线观看 在线自拍亚洲麻里梨夏 伊人成人网 视频直播 色情视频 色吧 日本av 欧美三级片 伦理电影 久久小说 久久播 黄色影片 黄色电影网站 韩国伦理 成人视频 成人AV 超碰97免费人妻 av天堂 1024基地手机看电影 99久久99视频99热在 爱色在线视频 超碰97免费人妻 超碰在线视频caoporon 大香蕉网站 国产偷拍自拍成人草 久久热国产在线视频 就要干成人网 男女上做床全播放 伊人在线观看视频播放 欧美骚妇性交暴菊 亚洲在线狂人色护士装性玩具23p 日本六十路母 夜夜撸 视频 色情片 三级片在线观看 秋霞在线观看秋 欧美av 撸撸影院 久久视频这里只精品10 久久re6热在线视频 黄色小说 狠狠色 福利视频 成人色图 超碰在线视频 超碰 av视频 18av青青草视频免费 99久久热最新地址获取 俺也去av天堂影音先锋 超碰av精品在线视频 成 人 片 在线观看 大香蕉在线视频手机 国外成人色情在线视频 久久热网址获取 蝌蚪视频在线播放视频 嫩女操逼网 青青草视频免费观看 日本AV视频在线观看看 色偷偷超碰视频青青草 偷偷色色奶奶视频 亚洲女小学生av 视频 一本道AV免费高清无码 236最新伦理宅宅电影 2019长得超级漂亮的av 2019午夜在线福利影院 免费视频直播 撸撸射 久久视频这里只精品 久久99re热在线播放 黄色网站 狠狠穞 第四色 成人色情网 超碰在线视频 白白色 av女优 777米奇影院第七色色 av电影在线观看 白白色在线视频青青草 超碰免费公开视频 成人av电影 大香蕉在线影院 好AV色在线视频 久久热在线视频 鲁大妈VA视频 牛牛超碰免费视频在线 青青草视频在线观看 日本黄大片免费播放 色悠悠久久久 五月色播影音先锋 亚洲情情爱爱色色 一本道无码在线av观看 2345 影视 2019在线伦理片免费 2019网址 大全 色天堂 2019求最新的a站绿色 2019能直接看的a站图片 2019国产自拍 2019 儿童电影 1级性交片 12岁幼女性交网站 1024手机在线播放基地 0855福利社区在线观看 欧美恐怖片吧 爱色影 av导航 97超碰色视频在线观看 av网站大全在线观看 苍苍影院午夜最新 超碰人人最新上线视频 成人免费黄色电影 第四色俺去也 好看的家庭伦理片最新 久久热在线视频精品 伦理片在线观看 強奸少婦大片 青青草在线av免费视频 日日夜夜鲁 妈妈鲁播放 手机看片 五月香婷婷俺也去俺也 亚洲人成免费网站网址 怡红院成人 2222av co在线影院 2019影音先锋av资源网 2019手机在线视频你懂 2019欧美限制电影 2019免费微信色群分享 2019福利小视频qq空间 2016影音先睡中文字幕 1插花综合菊花网 123免费视频在线看 1024手机看片福利永久 00271俺去也资源 英国超碰老奶奶视频 免费看言情小说全集在那里 97超碰人妻视频免费公开视频在线观看 在线自拍亚洲麻里梨夏 伊人成人网 视频直播 色情视频 色吧 日本av 欧美三级片 久久热这里只有精品 免费a片在线观看网站 青青草av视频在线观看 青青草在线视频网站 三级片在线播放 天天穞日日穞夜夜穞 小七妹在线视频 亚洲天堂无码色 在线成人色情电影网站 201美国十次新导航 2019一本道av大香蕉 2019手机网站你们懂得 2019欧美精品在线播放 2019毛片在线观看视频 2019大香蕉最新免费 2016影音先锋av噜噜色 1951年炸死蛇王图片 1234网址导航下载 1024基地手机在线看片 00271俺去也理论图片 伊人在线观看视频播放 欧美骚妇性交暴菊 亚洲在线狂人色护士装性玩具23p 日本六十路母 夜夜撸 视频 色情片 三级片在线观看 大香蕉狠狠干
      秋霞伦理电影在2017韩国在线伦 免费电影 免费在线伦理电影 百性阁手机首页综合 狠狠在线插口日日干 俺去啦怎么打不开 夜夜干日日操狠狠爱 6080yy电影在线看 久久青青草视频在线观 色偷偷 亚洲自拍偷拍成人网 777奇米影视四色 好看视频 狠狠干日日射在线视频 成人电影无码日本 奇米影视777影音先锋在线 888米奇视频四色 爱看福利午夜电影网 九七超碰资源站总站 天天噜av在线观看 奇米影视图片 奇米影视v1.1 奇米四色最新网址 色色色999韩 亚洲另类国产综合 噜噜色级 协和影视午夜剧场 亚洲男人的天堂av2017 秋霞伦理在线手机看片 奇米影视777 奇米影视第四狠狠 在线伦理电影网 欧美日日夜夜撸影院 俺去也 俺去啦官网 白雪美音 奇米影视盒播放器 亚洲色人 午夜电影播放器 亚洲图片色图 在线黄视频网站 亚洲来色色视频 操老女人小说 免费视频在线观看 ady成人电影 五月婷婷久久大香蕉 色综合网站 开心成人 手机看片福利盒子永久 第四色色自拍米奇色 在线伦理电影 888米奇视频四色 91视频爱拍 欧美视频毛片在线播放 日日夜夜撸撸 俺去啦五月丁香色 天天操 2018夜夜干日日干天天啪 www.97干 2018夜夜干日日干天天 奇米影视第四色新址 奇米影视777影音先锋在线 大香蕉网站 第9色男人网站 午夜福利免费观看 日日夜夜鲁鲁在线影院 色哥哥78 aiav 夜夜干日夜干在线视频 快播美女逼 其米四色超碰在线观看 777奇米影视盒 第九影院2017韩国伦理电影 奇米影视?777me 亚洲爱性图 秋霞伦理电影在2017韩国在线伦 虐恋久久 第四色第四色男人官网 78aiai色哥哥 草莓在线观看2017夜夜干精品 大香焦影院线观看视频 大香蕉网站 奇米影视v1.1 好屌色caoporn 奇米影视盒下载 老色鬼在线视频最新精品 秋霞伦理电影在线看 成人片网址 888米奇视频四色 快播伦理电影 俺去也俺去啦在线观看 免费伦理电影 色哥哥妹妹综合网先锋 av日日夜夜撸在线影院 俺去啦.com 亚洲va天堂 色第四色奇米888 米奇影视狠狠鲁 狠狠狠干夜夜射2018 老色鬼在线视频最新精品 国产偷拍 奇米影视?777me 日本黄大片免费播放器 亚洲高清视频色情网 日日夜夜撸在线影院 中国成人电影 444be奇米影视第四色 女厕露脸 第四色第四色男人官网 亚洲在线视频电影 天天干 视频啪啪免费观看 免费韩国伦理电影 激情图区 天天看高清影视在线 国产亚洲视频中文字幕 狠狠干狠狠操在线视频 奇米影视777 成人午夜在线直播 久久色在线视频精品屋 夜夜干2017在线视频 第四色空网址 色天使色天堂亚洲 91视频免费观看 刘亦菲斗转星移 快播资源网址大全 老色鬼在线视频最新精品 伦理 电影 调教妻弟的日日夜夜 三岛香奈 成人影院网址 奇米影视盒v1.1 成人动漫在线观看 手机看片福利永久国产 大香焦 97gaoav 在线综合亚洲欧美 米奇777影视首页 日日夜夜鲁妈妈干 先锋影音资源站 色哥哥妹妹综合网图片 奇米影视?777me 大香蕉网站 日月干夜夜干天天天啪 奇米视频第四 2019最新伦理电影 激情五月色人阁 奇米四色最新网址 伦理电影在2017韩国在线观看 六月婷婷丁香五月首页 伊人大香蕉久久网118 成人影片网 美女狠狠操 奇米影视网址 1024基地手机看片你懂i 奇米影视777撸啊撸 52欧美日日夜夜撸影院 91成人视频免费在线播放 狠狠爱干天天射综合 偷拍偷窥自拍图片专区 俺去啦网站 日日夜夜影院在线影院 成人影院网址 日日夜夜 男人的天堂 欧美经典伦理电影 6080电影网站 男人的天堂 青青草好屌色 成人四色 亚洲欧美日韩狼人射 jav高清 2019情侣自拍视频 91成人视频免费在线播放 韩国伦理电影网站 成人色综合 色哥哥网 韩国伦理电影网站 www.777me.com奇米影视 香港成人电影 奇米第四手机在线观看 www.成人电影.com 97爱色 五月丁香六月综俺去啦合缴情 色五月色人阁婷婷 米奇影视狠狠鲁 2019最新伦理电影 成年人色情片 成人午夜剧场 奇米影视永強 色人体少女图片 苍老师免费av视频 色天使色天堂亚洲 成人剧场 第四色第4色男人最新 奇米影视官网 米琪琪人格四色 成人分类?青青草视频 伦理电影有哪些 最新亚洲色拍偷拍 亚洲图片激情小说 午夜剧场qvod